PHBH, PHBL delar

70 graders vinkel, bild 3600

40 graders vinkel, bild 9330

Bränslebanjo med 6mm bensinslangs anslutning. Rekommenderar packning d4052 under bränslebanjo bult. Kortare bränslebanjobult kan krävas d4053. Passar till PHBE / PHB, PHBH, PHBL, SHB / [...]

Manifold sleeve (VHB(Z) 25mm)
Internal diameter 28,57mm

CD1 Type Idle emulsion tube
 
 

Manifold sleeve (VHB(T) 27-30mm)
Internal diameter 35mm

PHBH oil feed pipe
  Push fit - diameter 4.98mm. Pipe connection 3.5mm

Choke support casting

 

PHBH Trumpet - wide
  Outside diameter 59.2mm, 61.5mm over pipe fitting lip. 
16mm long.

Blandningskontrollskruv Dellorto 2,4x33mm - PHBH-PHBL-PHF-PHM Blandningsjusteringsskruv Dellorto (sats med fjäder, bricka och tätningsring) Längd kon = 2,4mm Total längd = 33mm

PHBH/PHBL Choke Lever

Choke jet (o-ring har artikel no d6173 Välj storlek
 

PHBL atomiser bush for AQ atomiser

Atomiser bush (the part which the atomiser screws into which is a push fit in the body of the carb. ) suitable for PHBL carbs. to be fitted with the AQ [...]

Product Description Kit contains 1 each:- O ring 8678 Washer 8260 Spring 7446 Mixture screw 9908 type Dimensions of mixture screw:- Total length 36mm Length of tapered tip 5mm. Length of parallel [...]

Oil feed connection for Dell'orto PHBH caburettors. Push fit - diameter 3.5mm. Pipe connection 2.5mm

PHBH carburettor top, Förgasarlock  

Choke Lever

PHBL carburettor top, Förgasarlock  

PHBL Trumpet - wide
59.2mm diameter
16mm long
Internal screw thread of M38 x 1.25  

(81) Air screw Air mixture screw for CS & CD variant carburettors. For O ring use part number d6173. Sprängskiss PHBH /L  

Mixture screw 12908 PHBH PHBL  

(54) Fuel inlet banjo - Metal
Det finns 2 typer av bränsle banjo 8mm. I metall d6273 som behöver fiberbricka d4052
eller i plast d9250. Sprängskiss PHBH /L    

90° angle elbow kit
  Can be used on top covers and choke housings.

Mixture screw 36mm Dimensions
Total Length 36mm
Tip Length 5mm
Parallel shaft length 12mm

PHBH Air screw CAGIVA MITO
Air Mixture screw only used on CAGIVA MITO Requires O ring d7571

(66) Float bowl nut - Metal bowl
OBS Endast för flottörhus i metall!
  Sprängskiss PHBH /L  

(78) Idle jet emulsion tube
Välj storlek (34-68) Sprängskiss PHBH /L  

(60) Fuel inlet banjo - TWIN
  Sprängskiss PHBH /L    

(3) BN typ Atomiser, till PHBE, PHB Dellorto förgasare. välj typ Sprängskiss Dellorto PHBE.pdf  

AV Type atomiser 
Välj storlek:
AV260 Atomiser
AV262 Atomiser
AV264 Atomiser
AV266 Atomiser
AV268 Atomiser
AV270 Atomiser
AV272 Atomiser
AV274 [...]

Förgasarnål X - Serie Se nål tabell
Passar Dellorto förgasare: Välj typ PHBH, PHBL 

B Type Idle emulsion tube Välj storlek
 

AS Type atomiser  
Välj storlek:
AS260 Atomiser
AS262 Atomiser
AS264 Atomiser
AS266 Atomiser
AS268 Atomiser
AS270 Atomiser
AS272 Atomiser
AS274 Atomiser

(74) PHBH Gasket set - FS/FD Sprängskiss PHBH /L  

AQ Type atomiser (PHBL) 
Välj storlek:
AQ260 Atomiser
AQ262 Atomiser
AQ264 Atomiser
AQ265 Atomiser
AQ266 Atomiser
AQ268 Atomiser
AQ270 Atomiser

Atomiser bush for T type atomiser
  Atomiser bush with 7mm raised shroud.

BF Type Idle emulsion tube Välj storlek
typ 1 eller typ 2

PHBH, PHM atomiser bush for 4 stroke atomiser
  Atomiser bush (the part which the atomiser screws into which is a push fit in the body of the carb. ) suitable for PHBL carbs. to be fitted [...]

(71) PHBH Trumpet - 55mm long Sprängskiss PHBH /L  

CF Type atomiser  
Välj storlek:
CF262 Atomiser
CF264 Atomiser
CF266 Atomiser
CF268 Atomiser
CF270 Atomiser
CF272 Atomiser
CF274 Atomiser
CF276 [...]

(71) PHBL Trumpet - 50mm long Sprängskiss PHBH /L  

(72) Float, single white 
Välj vikt
Typ 3 = 15760.3 float single 4g
Typ 4 = 15760.4 float single 5.2g
Typ 5 = 15760.5 float single 3.6g Sprängskiss PHBH /L Floatlevel [...]

(70) PHBH/L Float arm For individual floats Sprängskiss PHBH /L  

70° angle elbow kit
  Can be used on top covers and choke housings.

PHBL Manifold clamp

Bussning till nålrör Atomiser AN 4-takt PHBL & PHBG How to remove an atomiser bush.pdf

BZ Type atomiser 
BZ260 Atomiser

 

CE Type atomiser 
Välj storlek:
CE262 Atomiser
CE264 Atomiser
 

  Contains all gaskets and O rings for 1 carburettor. Also includes 1 x cable boot  

  PHBL Gasket set

Contains all gaskets and O rings for 1 carburettor. Also includes 1 cable boot.