PHBH, PHBL delar

90 graders vinkel, bild 3698

70 graders vinkel, bild 3600

50 graders vinkel, bild 10854

40 graders vinkel, bild 9330

M6x0.75 19mm lång

Trottelfjäder PHBH, PHM, PHF

Välj storlek Trottel PHBL 30
Trottel PHBL 40
Trottel PHBL 45
Trottel PHBL 50
Trottel PHBL 60  

Trottel PHBH, välj typ, 30, 35, 40, 45, 50, 60, 70

PHBH Slide - slotted
  These slides have a slot in the lower edge to allow extra airflow at idle speeds.   Ersättnings trottel är d9374

T Type atomiser 
Välj storlek:
T260 Atomiser
T262 Atomiser
T264 Atomiser
T265 Atomiser
T266 Atomiser
T268 Atomiser
T270 Atomiser  

Passar PHBG, PHBD, PHBH, PHBL, PHF

        Top cover screw        

(28) Circlip

PHBL Trumpet - wide
59.2mm diameter
16mm long
Internal screw thread of M38 x 1.25  

  PHBL Gasket set

Contains all gaskets and O rings for 1 carburettor. Also includes 1 cable boot.  

PHBL Needle plate  

PHBL Manifold clamp

(71) PHBL Trumpet - 50mm long Sprängskiss PHBH /L  

PHBL carburettor top, Förgasarlock  

PHBL atomiser bush for AQ atomiser

Atomiser bush (the part which the atomiser screws into which is a push fit in the body of the carb. ) suitable for PHBL carbs. to be fitted with the AQ [...]

AQ Type atomiser (PHBL) 
Välj storlek:
AQ260 Atomiser
AQ262 Atomiser
AQ264 Atomiser
AQ265 Atomiser
AQ266 Atomiser
AQ268 Atomiser
AQ270 Atomiser

PHBH/PHBL Choke Lever

PHBH/PHBL Choke Lever

PHBH Trumpet - wide
  Outside diameter 59.2mm, 61.5mm over pipe fitting lip. 
16mm long.

(150) PHBH QS diaphragm Sprängskiss PHBH /L  

Till choke nålrör

  Contains all gaskets and O rings for 1 carburettor. Also includes 1 x cable boot  

        PHBH Carburettor top O ring        

PHBH Needle plate  

PHBH Manifold clamp
Inside diameter before tensioning 46.8mm

(71) PHBH Trumpet - 55mm long Sprängskiss PHBH /L  

PHBH carburettor top, Förgasarlock  

Atomiser bush for PHBH

Atomiser bush (the part which the atomiser screws into which is a push fit in the body of the carb. ) suitable for PHBH carbs. to be fitted with the AV/BN/AS [...]

PHBH Air screw O ring for CAGIVA MITO
 

PHBH Air screw CAGIVA MITO
Air Mixture screw only used on CAGIVA MITO Requires O ring d7571

PHBH, PHM atomiser bush for 4 stroke atomiser
  Atomiser bush (the part which the atomiser screws into which is a push fit in the body of the carb. ) suitable for PHBL carbs. to be fitted [...]

PHBH/L Anti-surge washer

(74) PHBH Gasket set - FS/FD Sprängskiss PHBH /L  

Packning till PHBG & SI förgasare.
Passar till mutter D9812 och fottörhus D9811. 

Ytter diameter 16mm
Inner diameter 12mm
Tjocklek ca 1mm  

P Type atomiser  (VHB 27-30mm)
Välj storlek:
P260 Atomiser
P262 Atomiser
P265 Atomiser
P266 Atomiser
P268 Atomiser
P270 Atomiser  

Se nr 19 på bild Passar även PHBD, PHBH, PHBL

(62) Float bowl O ring - PHBL CS
  Sprängskiss PHBH /L Suitable for PHBL CS carburettors with pump diaphragm / pump valve system.  

(62) Float bowl O ring
  Sprängskiss PHBH /L    

O-ring   Kategori: PHBE/PHB parts, PHBH parts, 

(68) PHBH/L Float bowl nut O ring For use with float bowl nut p/n d11771 and plastic float bowl

Sprängskiss PHBH /L  

Oil feed connection for Dell'orto PHBH caburettors. Push fit - diameter 3.5mm. Pipe connection 2.5mm

PHBH oil feed pipe
  Push fit - diameter 4.98mm. Pipe connection 3.5mm

Breather pipe connection, will suit a wide range of Dellorto carburettors. Push fit, diameter 5mm, Pipe connection 3.8mm