Dellorto

R2151 SHA 16.16 Air intake diameter 59mm.
Clamp type engine connection to suit 19-21mm stub diameter. Air filter and plastic cover included. 82 Main jet

Passar Dellorto PHM förgasare Högkvalitativt legerings insugstratt med fast nät. 36mm lång + kupol med nät och gängad för 52mm insug på förgasaren.
Nätet är cirka 18mm utöver [...]

Internal bore size 26mm - to engine port. 60mm centre to centre for engine flange mount. Total length 26.2mm

Needle valve and seat 420 Methanol Metal tipped needle valve suitable for methanol use

(71) PHBH/L Float bowl - Metal - Individual floats  Metal float bowl with overflow and "pins" for individual floats Sprängskiss PHBH /L  

Air intake diameter 59mm. (R1682)
Clamp type engine connection to suit 18-21mm stub diameter. Will suit Mini-moto engines, but can be re-jetted to suit any engine. Standard [...]

PHBH Slide - slotted
  These slides have a slot in the lower edge to allow extra airflow at idle speeds.   Ersättnings trottel är d9374

R2217 SHA 14.9L Originally fitted to Rizzato Tokaido / Mars 50cc, but can be re-jetted to suit any engine. Includes throttle cable inner, air filter and plastic airbox.
To fit engine [...]

OBS. Denna trottel har ett V-spår mot motorsidan Sprängskiss Dellorto PHBE.pdf  

Välj typ Sprängskiss Dellorto PHBE.pdf  

(63) Metal float bowl with overflow and drain.
Plastic float bowl with overflow pipe for PHBH & PHBL carbs. with one piece float Sprängskiss PHBH /L  

(29) Electric choke - Minarelli PHVA   Elektrisk ckoke Piaggio diagram. Sprängskiss PHVA / PHBN

Trottel PHBH, välj typ, 30, 35, 40, 45, 50, 60, 70

(1) trottel PHM Välj typ:
PHM Trottel 501, 
PHM Trottel 503,
PHM Trottel 601,    PHM Förgasar diagram http://www.ryder-racing.com/dellorto/Pumpramp.pdf

(23) Electric choke - Piaggio PHVA/PHVB Elektrisk ckoke Piaggio diagram. Sprängskiss PHVA / PHBN

VHSB Slide  VHSB round topped slide for use in carburettors that have the plastic insert guide fitted. Väj typ

(1) trottel PHM Trottel för Dellorto PHM förgasare (ny form) OBS: PHM-trottel finns i gammal och ny form! Skillnaden mellan de två formerna ligger i utformningen av ramperna för [...]

(1) trottel PHM OBS! det finns 2 varianter av trottel till PHM, gammla och nya typen
Nya är partnummer d11815 och behöver modifieras för att passa gammla förgasaren. p/n 8639 Ramp [...]

PHF Slide Note there are 2 variants of this slide – early and current, the current slides part number 11570 will have to be modified to fit the early carburettors. If your original slide was [...]

VHSB Slide – No insert guide Tidig modell av trottel till VHSB där det inte fanns någon innre styrning i plast.   Väj typ

8.5 venturi kit Venturi kit contents: 1 x 8.5 Venturi
1 x Insert sleeve
1 x Gasket
2 x Venturi retaining screws
2 x Bolts to aid fitting of new venturi  Sprängskiss [...]

12.5 Venturi kit Venturi kit. Kit contents:- 1 x 12.5 Venturi
1 x Insert sleeve
1 x Gasket
2 x Venturi retaining screws
2 x Bolts to aid fitting of new [...]

R2631 PHBG 19DS med wire choke och 4-takt bestyckad M32 x 1.25 threaded air intake connection. Clamp type engine connection to suit 25mm stub. Cable type choke mechanism fitted, lift and [...]

VHSA Slide  Väj typ

VHSB Slide Chrome  VHSB heavier round topped slide for use in carburettors that have the plastic insert guide fitted. Väj typ

Välj storlek trottel, 40, 45, 50 VHSB Slide Chrome VHSB chrome round topped slide for use in carburettors that have the plastic insert guide fitted.  Sprängskiss VHSB34QD

R2509 PHBG 20BS M32 x 1,25 gängad luft insug. 
Ansluting till motor för gummi insug 25mm
Choke av typ "lyft och vrid" Standard jetting 40 Slide W7 needle 90 Main [...]

M32 x 1.25 threaded air intake connection. Clamp type engine connection to suit 24-26mm stub. Lift and twist type choke mechanism fitted, cable type fittings can be fitted if [...]

R2507 PHBG AS med 4-takt bestyckning M32 x 1.25 threaded air intake connection. Clamp type engine connection to suit 24-26mm stub. Lift and twist type choke mechanism fitted, cable type [...]

R1051 SI 20.20D A Dellorto Spaco Si20.20D Carburettor for Piaggio Vespa
Standard jetting - 96 Main jet
- BE3 Atomiser
- (40-120) Idle jet
- 160 Air corrector
- 02 [...]

R1057 SI 20.17D A Dellorto Spaco Si20.17D Carburettor for Piaggio Vespa 150
Standard jetting - 98 Main jet
- E1 Atomiser
- 42 Idle jet
- 160 Air corrector
- 02 [...]

M32 x 1,25 gängad luft insug
Ansluting till motor 24-26mm insugsrör
Choke av typ "lyft och vrid" Standard bestyckning
Trottel 40
W7 nål
70 Huvud munstycke
50 [...]

R2517 PHBG 15AS 4-takt M32 x 1,25 gängad luft insug
Ansluting till motor 24-26mm insugsrör
Choke av typ "lyft och vrid" Standard jetting 40 Slide W6 needle 78 Main [...]

VHSB Venturi  Finns i 3 storlekar 34, 38 och 39mm Väj storlek

VHSB Slide Aprilia VHSB “Aprilia” type slide. Väj typ

(1) trottel PHM OBS! det finns 2 varianter av trottel till PHM, gammla och nya typen Heavy slide for PHM carbs. without accelerator pump as used on KTM  Välj typ:
PHM Trottel 40, [...]

  35mm Air intake diameter. 24mm rubber sleeve type engine connection. Oil feed connection. No choke mechanism fitted.   Standard jetting   40 Slide A20 [...]

R6310 PHVA 14DS Suitable for Gas Gas Trial enduro cross MM50 1999. 35mm Plain air intake connection. 24mm rubber sleeve type engine connection. Lever choke fitted. Standard [...]

Original monterad på Derbi Senda R 50cc.
Levereras med Manuel choke monterad.

R3103 PHBN 12HS 38mm Plain air intake. 24mm Rubber sleeve type engine connection. Cable type operated choke mechanism fitted. Oil feed connection. Standard [...]

R2632 PHBG 21DS med wire choke M32 x 1.25 threaded air intake connection. Clamp type engine connection to suit 25mm stub. Cable type choke mechanism fitted, lift and twist type can be [...]

R3067 PHBN 17.5LS 38mm Plain air intake. 24mm Rubber sleeve type engine connection. Cable type operated choke mechanism fitted. Oil feed connection. Standard [...]

R2665 PHBG 21BD med wire choke M32 x 1.25 threaded air intake connection, fitted with air sleeve adaptor. Clamp type engine connection to suit 25mm stub. Cable type choke mechanism fitted, [...]

R2527 PHBG 20AS M32 x 1.25 threaded air intake connection. Clamp type engine connection to suit 24-26mm stub. Lift and twist type choke mechanism fitted, cable type fittings can be fitted if [...]

R2522 PHBG 19BS M32 x 1.25 threaded air intake connection. Clamp type engine connection to suit 24-26mm stub. Lift and twist type choke mechanism fitted, cable type fittings can be fitted if [...]

R0773 SHBC 19.19 Original monterad på Vespa Primevera. Levereras med monteringsklammer (d8131, d8128 och d8134) Standard Bestyckning  7938.1 Trottel 74 main jet 45 idle jet 60 [...]

SHB16.10F Stub fitting diameter 19.5mm Standard Bestyckning  6231.2 Trottel 55 main jet 38 idle jet 50 choke jet Kabel choke

R2633 PHBG 21CS med separat oljesmörjning M32 x 1.25 threaded air intake connection. Clamp type engine connection to suit 24-26mm stub. Lift and twist type choke mechanism fitted, cable [...]