Dellorto

R4928 PHM 38ND1 4 stroke carburettor with accelerator pump. Original equipment on KTM LC400 EGS-E 1996 M52 x 1.25 Threaded air intake connection.
46mm Rubber sleeve type engine [...]

R4906 PHM 38NS 4stroke carburettor with accelerator pump. M52 x 1.25 Threaded air intake connection. 46mm Rubber sleeve type engine connection. Lever type choke fitted, Cable type choke mechanism [...]

R4929 PHM 38SD1 Original equipment on KTM LC4 560cc 1996, but can be re-jetted to suit any engine. 4 Stroke carburettor without accelerator pump. Hot start device fitted. 64mm [...]

R4810 PHM 40AD Original equipment on Ducati 900SS, but can re-jetted to suit any engine. 4 stroke carburettor with accelrator pump. Float tickler for cold starting. M52 x 1.25 Threaded air [...]

R4809 PHM 40AS Original equipment on Ducati 900SS, but can re-jetted to suit any engine. 4 stroke carburettor with accelrator pump. Float tickler for cold starting. M52 x 1.25 Threaded air [...]

R4921 PHM 40MS Original equipment on Husqvarna TC Cross 600cc, but can be re-jetted to suit any engine. 4 Stroke carburettor with accelerator pump. M52 x 1.25 Threaded air intake [...]

R4924 PHM 40ND Original equipment on Moto Guzzi 1100 sport 1994, but can be re-jetted to suit any engine.
4 stroke carburettor with accelerator pump. M52 x 1.25 Threaded air intake [...]

R4842 PHM 40ND 4 stroke carburettor with accelerator pump. M52 x 1.25 Threaded air intake connection. 46mm Rubber sleeve type engine connection. Cable type choke mechanism fitted, lever [...]

R4923 PHM 40NS Original equipment on Moto Guzzi 1100 sport 1994, but can be re-jetted to suit any engine.
4 stroke carburettor with accelerator pump. M52 x 1.25 Threaded air intake [...]

R4930 PHM 40SD Original equipment on KTM Duke 620,  but can be re-jetted to suit any engine. 4 Stroke carburettor without accelerator pump. Hot start device fitted. 64mm plain (bolt [...]

R4927 PHM 40ZS Original equipment on Husaberg MC501 1996,  but can be re-jetted to suit any engine. 4 stroke carburettor without accelerator pump 64mm plain (bolt on) air intake [...]

Original monterad på Derbi Senda R 50cc.
Levereras med Manuel choke monterad.

R6310 PHVA 14DS Suitable for Gas Gas Trial enduro cross MM50 1999. 35mm Plain air intake connection. 24mm rubber sleeve type engine connection. Lever choke fitted. Standard [...]

  35mm Air intake diameter. 24mm rubber sleeve type engine connection. Oil feed connection. No choke mechanism fitted.   Standard jetting   40 Slide A20 [...]

40mm air intake diameter.
29mm rubber sleeve type engine connection.
Oil feed connection.

Originally fitted to Piaggio Runner 125cc, but can be re-jetted to suit any engine. Comes with throttle cable and electric choke mechanism.   Fitted with oil feed.   Standard [...]

R1178 PHVB 20.5ED
  Originally fitted to Piaggio Typhoon 125cc, but can be re-jetted to suit any engine. Comes with throttle cable and electric choke mechanism. Fitted with oil [...]

41.5mm air intake diameter.
29mm Rubber sleeve type engine connection.
Electric choke mechanism fitted, 2 pin oval plug.
Fitted with oil feed.

R1588 SHA 12.10 
  Originally fitted to Piaggio Ciao, but can be re-jetted to suit any engine.   Standard jetting 42 Main jet

Air intake diameter 59mm.
Clamp type engine connection to suit 18-21mm stub diameter.

Air intake diameter 59mm. (R1682)
Clamp type engine connection to suit 18-21mm stub diameter. Will suit Mini-moto engines, but can be re-jetted to suit any engine. Standard [...]

R2217 SHA 14.9L Originally fitted to Rizzato Tokaido / Mars 50cc, but can be re-jetted to suit any engine. Includes throttle cable inner, air filter and plastic airbox.
To fit engine [...]

R2043 SHA 15.15 Air intake diameter 59mm.
Clamp type engine connection to suit 18-21mm stub diameter. Air filter and plastic cover included. 68 Main jet

R2045 SHA 15.15C
  Air intake diameter 59mm Clamp type engine connection to suit 19-21mm stub. Air filter and plastic cover included.   Standard jetting 68 Main jet

R2151 SHA 16.16 Air intake diameter 59mm.
Clamp type engine connection to suit 19-21mm stub diameter. Air filter and plastic cover included. 82 Main jet

R0753 SHB16.10 Original monterad på Vespa.
Stub fitting diameter 19.5mm Standard Bestyckning  6231.2 Trottel 51 main jet 38 idle jet 50 choke jet

SHB16.10F Stub fitting diameter 19.5mm Standard Bestyckning  6231.2 Trottel 55 main jet 38 idle jet 50 choke jet Kabel choke

R0919 SHB 16.14F Stub fitting diameter 21.5mm Standard Bestyckning  6231.8 Trottel 63 main jet 42 idle jet 50 choke jet

R0764 SHB16.16 Original monterad på Vespa.
Stub fitting diameter 21.5mm Standard Bestyckning  6231.2 Trottel 74 main jet 42 idle jet 50 choke jet

R0879 SHB 16.16F Original monterad på Piaggio Vespa.
Stub fitting diameter 21.4mm Standard Bestyckning  .2 Trottel 70 main jet 38 idle jet 50 choke jet

R0958 SHBC 18.16P Original monterad på Vespa Motacarro Ape. Stub fitting diameter 22.9mm   Standard Bestyckning  10569.3 Trottel 6230.1 Atomiser 56 main jet 42 idle [...]

R0773 SHBC 19.19 Original monterad på Vespa Primevera. Levereras med monteringsklammer (d8131, d8128 och d8134) Standard Bestyckning  7938.1 Trottel 74 main jet 45 idle jet 60 [...]

R0785 SHBC 19.19D Stub diameter 24mm. Levereras med luftfilter Standard Bestyckning  .3 Trottel 90 main jet 40 idle jet 60 choke jet

R0911 SHBC 19.19E Original monterad på Vespa PK5 XLS. Stub diameter 22.9 Standard Bestyckning  10569.1 Trottel 72 main jet 42 idle jet 60 choke jet

R0909 SHBC 20L Original monterad på Piaggio Vespa P125 ETS 1986. Stub diameter 27mm Standard Bestyckning  10569.1 Trottel 76 main jet 50 idle jet 60 choke jet

R1057 SI 20.17D A Dellorto Spaco Si20.17D Carburettor for Piaggio Vespa 150
Standard jetting - 98 Main jet
- E1 Atomiser
- 42 Idle jet
- 160 Air corrector
- 02 [...]

R0587 SI 20.20D
  Originally fitted to Vespa P125, but can be jetted to suit any engine.
Standard jetting - 6823.11 slide
- BE5 Atomiser
- 96 Main jet
- 9892.8 [...]

R1051 SI 20.20D A Dellorto Spaco Si20.20D Carburettor for Piaggio Vespa
Standard jetting - 96 Main jet
- BE3 Atomiser
- (40-120) Idle jet
- 160 Air corrector
- 02 [...]

R0581 SI 24.24E
  Originally fitted to Vespa 200E PX etc, but can be jetted to suit any engine. (no oil feed)
Standard jetting - 8492.4 slide
- BE3 Atomiser
- 116 Main [...]

R0583 SI 24.24E
  Originally fitted to Vespa P200E PX200, but can be jetted to suit any engine For PX etc. with Oil feed.
Standard jetting - 8492.4 slide
- BE5 Atomiser
- [...]

R0594 SI 24.24G
  Originally fitted to Vespa T5, but can be jetted to suit any engine.
Standard jetting - 8492.5 slide
- BE4 Atomiser
- 110 Main jet
- 11868.1 Idle [...]

R0617 SI 26.26E Piaggio Vespa PX/PE200
  For pre-mixed 2 stroke oil.
Standard jetting - 8492.4 slide
- BE3 Atomiser
- 120 Main jet
- 9892.04 (55-160) Idle jet
- [...]

R0617 SI 26.26E Piaggio Vespa T5
  For pre-mixed 2 stroke oil.
Standard jetting - 8492.5 slide
- BE4 Atomiser
- 110 Main jet
- 11868.1 (50/100) Idle jet
- 120 [...]

Jetted to suit Rotax Max 125cc formula kart. 64mm Plain air intake. 45mm Rubber sleeve type engine connection. Lever choke fitted. Standard Jetting 40 Slide K27 Needle 266FN [...]